Peak Atlas Breakout Stand
-
FREE 3d STL models
FREE STL models available below for your to 3d print at home.
Peak Atlas Breakout Stand - STL model - M2.5 screws
Peak Atlas Breakout Stand - STL model - snap fit
About The Peak Atlas Breakout Stand
One of the first gadgets I designed was the 3-Pin ZIF Breakout board. Though it can be used in a variety of contexts, I created it to be used with my Peak Atlas DCA75 device as a way of speeding things up. I didn't want to fidget with component leads and those small, fragile hooks every time I wanted to measure something.
Just recently I upgraded my own jerry-rigged DCA stand (made from an old cigar box) to this neat 3d printed design. It receives your DCA device and grips it firmly while also accepting your HA! Labs 3-Pin ZIF breakout board. The result is a solid, one piece contraption that helps you make fast work of measuring your devices.
If you've already got a 3-Pin ZIF Breakout board, you can buy just the stand+screws. Otherwise you can buy the stand+screws bundled with a 3-Pin ZIF Breakout.
And if you have access to a 3d printer, you can just download FREE STL files for the stand from the sidebar here and save yourself a few bucks! I even included a 'snap in' design so you don't have to source the screws if you don't want to.
You might also dig...
-
Breadboard Butler
A no-nonsense, power and signal caddy workhorse for breadboarding low-voltage designs. An indispensable addition to your electronics prototyping workbench. I designed it when I couldn't find an existing breadboard module out there that fit my needs. This one does. It's awesome. I suspect you'll dig it too. READ MORE...$88 USD BUY/DETAILS ⮕ -
Quick Sine - Sine Wave Generator
The Quick Sine is a simple generator that reliably produces a lovely sine wave without significant distortion. It's designed around a simple Wien bridge oscillator network and tuned to offer you a selection of 9 different frequencies within the audio range. It will output a constant line level signal. READ MORE...$12-$50 USD BUY/DETAILS ⮕ -
Pot Buddy XL
Instead of stretching the springs of your breadboard with thick pot pins or plucking out your pot just to get a read on where it's set, grab a Pot Buddy XL and jumper your pots into place. Connect your multimeter to the loop hookups of the board & simply flip a toggle switch to get a quick read on any of your pots. READ MORE...$8-$46 USD BUY/DETAILS ⮕ -
Breadboard Breakout - Switch DP3T
A simple, low profile breakout board for adding DP3T switches to your breadboarding project. The small slide switch makes these ideal for the breadboard and this handy PCB translates the footprint into a breadboard friendly layout. Pop 'em in and get back to business! READ MORE...$2-$5 USD BUY/DETAILS ⮕